Oppo BDP-103 User Manual download pdf (Page 73)

SETUP MENU OPTIONS

Speaker Settings

You can set the size, distance and trim level for each speaker by using the LEFT/RIGHT ARROW

buttons to move the cursor to highlight the speaker and then press the ENTER button. The Speaker

Settings menu on the right side of the screen will be activated. In Speaker Settings, use the UP/DOWN

ARROW buttons to select a parameter, and then press the ENTER button to change it. To exit the

Speaker Settings menu and return to the Speaker Configuration illustration, press the LEFT ARROW

button or select the Exit option. You can also move on to configure the next speaker by selecting

the

Next Speaker option.

The following speaker parameters can be configured:

1. Size: The following speaker size parameters control bass filtering for the speakers.

Large – All audio content is passed to the appropriate speaker.

Small – All audio content, except for bass frequencies, is passed to the appropriate speaker.

The purpose is to reduce possible distortion. If a subwoofer is available, bass frequencies are re-

directed to the subwoofer, otherwise, they are discarded. The bass frequency upper limit is set

by the Crossover Frequency selection in the Setup Menu (see

page 71 for details).

Off – Speaker for the corresponding position does not exist. Audio for the missing speaker is

redirected to other speakers or discarded if redirection is not possible.

On (for Subwoofer only) – Specifies that a subwoofer is available.

NOTE

The Size for Front, Surround and Surround Back speakers is configured in pairs. Changes to

the size of one speaker will automatically change the other of the pair.

2. Distance: The speaker distance parameters set delay control for the corresponding audio channel.

The delay is to compensate for the audio propagation time difference caused by the placement of

speakers.

Speaker distance compensation is not required if the A/V receiver has the capability to adjust

channel delay and compensate for speaker distance differences. However, if your receiver does not

have such functions (most receivers do not offer these functions for their multi-channel analog input),

you may adjust them through the player. Speaker distance delay is only a

pplied if the player is

decoding multi-channel audio. If you use bitstream audio output to your A/V receiver, the bitstream

audio is not adjusted for speaker distance delay.

ᶅᶰᶸᶯᵡᶎᶪᶹ

ᶕᶦᶴᶵᵡᶕᶰᶯᶦ

ᶆᶹᶪᶵ

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 91 92

No comments

Oppo BDP-103 User Manual Page 73